Új hozzászólás Aktív témák

• #56621 csixy addikt King Unique #56620

  Új Válasz 2017-12-15 21:39:44 #56621

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  csixy

  addikt

  válasz King Unique #56620 üzenetére

  Natívan bedugva sem megy. A vindows eszközkezelőben betölthető egy üres kötet, de aztán kitolja magából a winnyóz is a drivert. Linuxban ugyanez van . Frissen bedugva ez, a második nekifutásra meg halott:

  [naki@nakiva-pc ~]$ sudo dmesg | tail
  [sudo] naki jelszava:
  [ 431.551817] usb-storage 2-1.1:1.0: USB Mass Storage device detected
  [ 431.552353] scsi host4: usb-storage 2-1.1:1.0
  [ 431.552459] usbcore: registered new interface driver usb-storage
  [ 431.554517] usbcore: registered new interface driver uas
  [ 432.577188] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6
  [ 432.577471] sd 4:0:0:0: Attached scsi generic sg2 type 0
  [ 432.578021] sd 4:0:0:0: [sdb] 241958912 512-byte logical blocks: (124 GB/115 GiB)
  [ 432.579017] sd 4:0:0:0: [sdb] Write Protect is off
  [ 432.579019] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
  [ 432.581248] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  [naki@nakiva-pc ~]$ dmesg | tail
  [ 431.551817] usb-storage 2-1.1:1.0: USB Mass Storage device detected
  [ 431.552353] scsi host4: usb-storage 2-1.1:1.0
  [ 431.552459] usbcore: registered new interface driver usb-storage
  [ 431.554517] usbcore: registered new interface driver uas
  [ 432.577188] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6
  [ 432.577471] sd 4:0:0:0: Attached scsi generic sg2 type 0
  [ 432.578021] sd 4:0:0:0: [sdb] 241958912 512-byte logical blocks: (124 GB/115 GiB)
  [ 432.579017] sd 4:0:0:0: [sdb] Write Protect is off
  [ 432.579019] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
  [ 432.581248] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  [naki@nakiva-pc ~]$ dmesg | tail
  [ 431.552459] usbcore: registered new interface driver usb-storage
  [ 431.554517] usbcore: registered new interface driver uas
  [ 432.577188] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6
  [ 432.577471] sd 4:0:0:0: Attached scsi generic sg2 type 0
  [ 432.578021] sd 4:0:0:0: [sdb] 241958912 512-byte logical blocks: (124 GB/115 GiB)
  [ 432.579017] sd 4:0:0:0: [sdb] Write Protect is off
  [ 432.579019] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
  [ 432.581248] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  [ 463.919200] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 469.025756] usb 2-1.1: device descriptor read/64, error -110
  [naki@nakiva-pc ~]$ dmesg | tail
  [ 432.577471] sd 4:0:0:0: Attached scsi generic sg2 type 0
  [ 432.578021] sd 4:0:0:0: [sdb] 241958912 512-byte logical blocks: (124 GB/115 GiB)
  [ 432.579017] sd 4:0:0:0: [sdb] Write Protect is off
  [ 432.579019] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
  [ 432.581248] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  [ 463.919200] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 469.025756] usb 2-1.1: device descriptor read/64, error -110
  [ 484.599165] usb 2-1.1: device descriptor read/64, error -110
  [ 484.779174] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 489.932504] usb 2-1.1: device descriptor read/64, error -110
  [naki@nakiva-pc ~]$ dmesg | tail
  [ 463.919200] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 469.025756] usb 2-1.1: device descriptor read/64, error -110
  [ 484.599165] usb 2-1.1: device descriptor read/64, error -110
  [ 484.779174] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 489.932504] usb 2-1.1: device descriptor read/64, error -110
  [ 505.505757] usb 2-1.1: device descriptor read/64, error -110
  [ 505.685766] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [ 510.765578] usb 2-1.1: device descriptor read/8, error -110
  [ 516.098897] usb 2-1.1: device descriptor read/8, error -110
  [ 516.275665] usb 2-1.1: reset high-speed USB device number 4 using ehci-pci
  [naki@nakiva-pc ~]$

Új hozzászólás Aktív témák