Új hozzászólás Aktív témák

• #7836 tusi_ addikt

  Új Válasz 2014-12-25 03:59:46 #7836

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  tusi_

  addikt

  

  R1#terminal length 0
  R1#
  R1#
  R1#
  R1#
  R1#sh run
  Building configuration...

  Current configuration : 1606 bytes
  !
  version 12.4
  service timestamps debug datetime msec
  service timestamps log datetime msec
  no service password-encryption
  !
  hostname R1
  !
  boot-start-marker
  boot-end-marker
  !
  !
  no aaa new-model
  memory-size iomem 5
  no ip icmp rate-limit unreachable
  ip cef
  !
  !
  !
  !
  no ip domain lookup
  !
  multilink bundle-name authenticated
  !
  archive
  log config
  hidekeys
  !
  !
  crypto isakmp policy 1
  encr aes
  authentication pre-share
  group 2
  lifetime 200
  crypto isakmp key cisco address 1.1.1.2
  !
  !
  crypto ipsec transform-set ciscoset esp-aes esp-sha-hmac
  !
  crypto map CMAP 1 ipsec-isakmp
  set peer 1.1.1.2
  set transform-set ciscoset
  set pfs group2
  match address VPN
  !
  ip tcp synwait-time 5
  !
  interface FastEthernet0/0
  ip address 1.1.1.1 255.255.255.0
  ip nat outside
  ip virtual-reassembly
  speed 100
  full-duplex
  crypto map CMAP
  !
  interface FastEthernet0/1
  ip address 192.168.0.1 255.255.255.0
  ip nat inside
  ip virtual-reassembly
  speed 100
  full-duplex
  !
  ip forward-protocol nd
  ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
  !
  !
  no ip http server
  no ip http secure-server
  ip nat inside source list NAT interface FastEthernet0/0 overload
  !
  ip access-list extended NAT
  deny tcp 192.168.0.0 0.0.0.255 host 10.10.10.4 eq www
  permit ip 192.168.0.0 0.0.0.255 any
  ip access-list extended VPN
  permit tcp 192.168.0.0 0.0.0.255 host 10.10.10.4 eq www
  !
  control-plane
  !
  line con 0
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  line aux 0
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  line vty 0 4
  login
  !
  !
  end

  R1#

  ________________

  R2#terminal length 0
  R2#
  R2#sh run
  Building configuration...

  Current configuration : 1672 bytes
  !
  version 12.4
  service timestamps debug datetime msec
  service timestamps log datetime msec
  no service password-encryption
  !
  hostname R2
  !
  boot-start-marker
  boot-end-marker
  !
  !
  no aaa new-model
  memory-size iomem 5
  no ip icmp rate-limit unreachable
  ip cef
  !
  !
  !
  !
  no ip domain lookup
  !
  multilink bundle-name authenticated
  !
  !
  archive
  log config
  hidekeys
  !
  !
  crypto isakmp policy 1
  encr aes
  authentication pre-share
  group 2
  lifetime 200
  crypto isakmp key cisco address 1.1.1.1
  !
  !
  crypto ipsec transform-set ciscoset esp-aes esp-sha-hmac
  !
  crypto map CMAP 1 ipsec-isakmp
  set peer 1.1.1.1
  set transform-set ciscoset
  set pfs group2
  match address VPN
  !
  !
  !
  ip tcp synwait-time 5
  !
  !
  !
  !
  interface FastEthernet0/0
  ip address 1.1.1.2 255.255.255.0
  ip nat outside
  ip virtual-reassembly
  speed 100
  full-duplex
  crypto map CMAP
  !
  interface FastEthernet0/1
  ip address 10.10.10.2 255.255.255.0
  ip nat inside
  ip virtual-reassembly
  speed 100
  full-duplex
  !
  ip forward-protocol nd
  ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
  !
  !
  no ip http server
  no ip http secure-server
  ip nat inside source list NAT interface FastEthernet0/0 overload
  ip nat inside source static tcp 1.1.1.2 80 10.10.10.4 80 extendable
  !
  ip access-list extended NAT
  deny tcp host 10.10.10.4 eq www 192.168.0.0 0.0.0.255
  permit ip 10.10.10.0 0.0.0.255 any
  ip access-list extended VPN
  permit tcp host 10.10.10.4 eq www 192.168.0.0 0.0.0.255
  !
  control-plane
  !
  line con 0
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  line aux 0
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  line vty 0 4
  login
  !
  !
  end

  R2#

  Nemtudok amugysem aludni

Új hozzászólás Aktív témák