Hirdetés

Új hozzászólás Aktív témák

  • kem

    addikt

    válasz kem #12505 üzenetére

    Most mar atirtam csomo mindent, de meg mindig nem megy. Wifi mukodik, a reouterrol tudom pingelni 8.8.8.8-at, de megsincs net. A konfig filebol kiikszeltem ami kenyes, a tobbi nem az.

    Building configuration...

    Current configuration : 2557 bytes
    !
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname XXX
    !
    boot-start-marker
    boot-end-marker
    !
    !
    no aaa new-model
    memory-size iomem 25
    !
    !
    dot11 syslog
    !
    dot11 ssid XXX
    vlan 1
    authentication open
    authentication key-management wpa
    guest-mode
    wpa-psk ascii 0 XXX
    !
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.0.1 192.168.0.100
    !
    ip dhcp pool Local-Network
    network 192.168.0.0 255.255.255.0
    default-router 192.168.0.1
    dns-server 8.8.8.8 8.8.4.4
    !
    !
    !
    !
    !
    !
    !
    archive
    log config
    hidekeys
    !
    !
    !
    bridge irb
    !
    !
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    dsl operating-mode auto
    dsl enable-training-log
    !
    interface ATM0.1 point-to-point
    description DSL sub interface
    pvc 0/38
    encapsulation aal5mux ppp dialer
    dialer pool-member 1
    !
    !
    interface FastEthernet0
    speed 100
    !
    interface FastEthernet1
    speed 100
    !
    interface FastEthernet2
    speed 100
    !
    interface FastEthernet3
    speed 100
    !
    interface Dot11Radio0
    no ip address
    no ip route-cache cef
    no ip route-cache
    !
    encryption vlan 1 mode ciphers aes-ccm
    !
    ssid XXX
    !
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    world-mode dot11d country GB indoor
    !
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    ip virtual-reassembly
    no ip route-cache
    no cdp enable
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    !
    interface Vlan1
    no ip address
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    bridge-group 1
    bridge-group 1 spanning-disabled
    !
    interface Dialer0
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    no cdp enable
    ppp authentication chap pap callin
    ppp chap hostname install@o2broadband.co.uk
    ppp chap password 0 install
    ppp pap sent-username install@o2broadband.co.uk password 0 install
    !
    interface BVI1
    ip address 192.168.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    no ip route-cache cef
    no ip route-cache
    !
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer0
    !
    no ip http server
    no ip http secure-server
    ip nat inside source list natlist interface Dot11Radio0 overload
    !
    !
    !
    !
    control-plane
    !
    bridge 1 route ip
    !
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    login
    !
    scheduler max-task-time 5000
    end

    Elore is koszi ha valaki tud segiteni! :R :R :R
    kem

    Köszi!

Új hozzászólás Aktív témák