2. Fórumok
  3. Notebookok
  4. HP notebook topic
  5. (kiemelt téma)

Hirdetés

Új hozzászólás Aktív témák

  • #47392 Klara_ őstag hódmaci #47391
    Új Válasz #47392
    Új hozzászólás
    Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
    Privát üzenet küldése

    Klara_

    őstag

    válasz hódmaci #47391 üzenetére

    Kovesd a linkbol a leirast, nekem igy sikerult a 8as szerian, W10 alatt:
    Ha tudod a pontosan az elozo FW verziojat, akkor probalgatni kell ahogy irja is, en sem tudtam pontosan, mert csak 6.41-et irt ki es abbol van tobb fele is, cserelgettem a *.bin-eket es az egyiket elfogadta, utana, kiirja, hogy meg hanyszor cserelhetsz, ujraindul majd nyomsz egy F1-et es kesz. Szerentem erdemes 2.0-ra firssiteni, ha mar piszkalod.
    " Instructions

    Run softpaq to extract files. By default it will extract the files in C:\SWSETUP\SP81900 folder.

    Copy the desired TPM FW BIN file and the appropriate HP TPM Configuration Utility (either 32-bit or 64-bit) to a temporary folder. Only one TPM FW BIN file is allowed in the temporary folder.

    Do not rename the TPM FW BIN file.

    Open CMD Prompt in Administrator mode and run TPM.MSC to determine the TPM Manufacturer Information.

    - Manufacturer Name: IFX

    - For TPM 1.2, check the Manufacturer Version 6.40 or 6.41:

    - For version 6.40, use file TPM12_6.40.190.0_to_TPM12_6.43.243.0.BIN

    - For version 6.41, include logic that tries one and,if it fails, uses the other of these:

    TPM12_6.41.197.0_to_TPM12_6.43.243.0.BIN

    or

    TPM12_6.41.198.0_to_TPM12_6.43.243.0.BIN

    NOTE: This is necessary because TPM.msc does not reveal the actual build; no way to tell if you currently have 6.41.197 or 6.41.198.

    - For TPM 2.0, Manufacturer Version: Either 7.40 or 7.41 or 7.60 or 7.61

    - Specification version: Either 1.2 or 2.0

    The utility supports

    - Graphical User Interface (GUI) for step-by-step execution

    - Command line mode (including silent execution)

    Run MSINFO32 to determine 32-bit or 64-bit OS. Examine System Type (will show either "x64-based PC" or "32-based PC").

    Run the appropriate utility (TPMConfig.exe for 32-bit OS or TPMConfig64.exe for 64-bit OS) as an Administrator from the folder where the utility and TPM FW BIN file are located.

    Additional Notes

    On Windows 7, TPM 1.2 must be activated in BIOS (Check TPM state in BIOS).

    On Windows 8.x or Windows 10, the OS will automatically take ownership of TPM.

    Windows 8.x and Windows 10 require GPT partition style when using TPM 2.0. The BIOS setting for boot mode should be set to native UEFI (recommended) or UEFI with CSM.
    Windows 7-64, Windows 8.x, and Windows 10 will work with MBR or GPT partition style when using TPM 1.2."

    [ Szerkesztve ]

Új hozzászólás Aktív témák