SSD kibeszélő - PROHARDVER! Hozzászólások

Hirdetés

Legfrissebb anyagok

PROHARDVER! témák

Mobilarena témák

IT café témák

GAMEPOD témák

LOGOUT témák

Téma összefoglaló

Utoljára frissítve: 2023-11-09 14:16

PROHARDVER!

Ide várunk:
- minden saját tapasztalatot/tesztet, észrevételt a már megvett, és használatban lévő SSD-vel kapcsolatban, illetve mindenféle, megbízható forrásból való cikket/tesztet/érdekességet.

Új hozzászólás Aktív témák

#39982 Kronk őstag ubyegon2 #39981

Új Válasz 2020-03-07 21:13:06 #39982
Új hozzászólás
Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
Privát üzenet küldése

Kronk

őstag

válasz ubyegon2 #39981 üzenetére

Ami képet csatoltam, az a hdsentinel kimentele volt, és itt van amit kértél

Nem igazán látom mit kéne nézni itt

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.4.0-0.bpo.3-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Silicon Motion based SSDs
Device Model: ADATA SU800
Serial Number: 2J3020068623
LU WWN Device Id: 5 707c18 1007fb0c5
Firmware Version: R0918B
User Capacity: 512.110.190.592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Mar 7 21:06:06 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 71
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 22
160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 50
163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 5
164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 2440
165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 6
166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 1
167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 1
168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 1000
169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100
175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 17
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 49
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 13289
242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 20656
245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 19520
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
6 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.