Új hozzászólás Aktív témák

• #190 promark csendes tag dchard #136

  Új Válasz 2011-02-16 14:37:30 #190

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  promark

  csendes tag

  válasz dchard #136 üzenetére

  DSL 321B
  Gyárilag: H/W Ver.: D1 , F/W Ver.: EU_1.00
  Frissítve először F/W.: DE_1.01, másodszor DE_1.03
  Ami érdekesség, hogy a második frissítés (DE_1.03) átállította a H/W-t D2-re.

  # dmesg
  Linux version 2.6.8.1 (root@mochow) (gcc version 3.4.2) #1 Tue Dec 28 20:12:52 CST 2010
  Serial flash device: name S25FL016A, id 0x0114, size 2048KB
  96332CG prom init
  CPU revision is: 00029010
  Determined physical RAM map:
  memory: 007a0000 @ 00000000 (usable)
  On node 0 totalpages: 1952
  DMA zone: 1952 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
  Built 1 zonelists
  Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
  brcm mips: enabling icache and dcache...
  Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
  Primary data cache 8kB 2-way, linesize 16 bytes.
  PID hash table entries: 32 (order 5: 256 bytes)
  Using 120.000 MHz high precision timer.
  Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Memory: 6048k/7808k available (1260k kernel code, 1740k reserved, 187k data, 64k init, 0k highmem)
  Calibrating delay loop... 239.20 BogoMIPS
  Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  Checking for 'wait' instruction... unavailable.
  NET: Registered protocol family 16
  Total Flash size: 2048K with 32 sectors
  File system address: 0xbfc10100
  Can't analyze prologue code at 80149d04
  PPP generic driver version 2.4.2
  NET: Registered protocol family 24
  Using noop io scheduler
  bcm963xx_mtd driver v1.0
  brcmboard: brcm_board_init entry

  ======= GPIO CONFIG_BCM96338 inited ========
  Serial: BCM63XX driver $Revision: 3.00 $
  ttyS0 at MMIO 0xfffe0300 (irq = 10) is a BCM63XX
  NET: Registered protocol family 2
  IP: routing cache hash table of 512 buckets, 4Kbytes
  TCP: Hash tables configured (established 512 bind 1024)
  NET: Registered protocol family 1
  NET: Registered protocol family 17
  Ebtables v2.0 registered
  NET: Registered protocol family 8
  NET: Registered protocol family 20
  VFS: Mounted root (squashfs filesystem) readonly.
  Freeing unused kernel memory: 64k freed
  Algorithmics/MIPS FPU Emulator v1.5
  atmapi: module license 'Proprietary' taints kernel.
  adsl: adsl_init entry
  blaadd: blaa_detect entry
  Broadcom BCMPROCFS v1.0 initialized
  Broadcom BCM6338A2 Ethernet Network Device v0.3 Dec 28 2010 20:12:06
  Config Internal PHY Through MDIO
  BCM63xx_ENET: 100 MB Full-Duplex (auto-neg)
  eth0: MAC Address: 00:26:5A:013:61
  eth0 Link UP.
  ZIPB............
  FLAG: 1
  BcmAdsl_Initialize=0xC00683F8, g_pFnNotifyCallback=0xC00810A4
  AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00003980 adsl2=0x00000000
  pSdramPHY=0xA07FFFF8, 0x0 0x0
  AdslCoreHwReset: AdslOemDataAddr = 0xA07F9244
  AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00003980 adsl2=0x00000000
  DoInitialize: do kerSysRegisterDyingGaspHandler
  dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
  DoInitialize: do put_user
  DoInitialize: do kerSysLedCtrl
  ATM proc init !!!
  ZIPB............
  FLAG: 1
  ADSL G.994 training
  Device UP br0
  Fib_add_ifaddr : DEV br0
  Device UP: br0
  Device add to fib: br0
  device eth0 entered promiscuous mode
  br0: port 1(eth0) entering learning state
  br0: topology change detected, propagating
  br0: port 1(eth0) entering forwarding state
  device nas_0_1_32 entered promiscuous mode
  br0: port 2(nas_0_1_32) entering learning state
  br0: topology change detected, propagating
  br0: port 2(nas_0_1_32) entering forwarding state
  eth0 Link DOWN.
  eth0 Link UP.

  ioctl, p_name=diapd
  ADSL G.992 started

Új hozzászólás Aktív témák