Hirdetés

Új hozzászólás Aktív témák

  • King Unique

    titán

    válasz Jester01 #23212 üzenetére

    Linux Mint 17.3 alatt néztem 2 db 2,5" USB 3.0 külső házban egy Kingston HyperX FURY 120 GB SSD-t. Jelenleg 3 db Ext4 partíció van rajta (+ üres hely), mindegyiken Linux fut. A partíciókat GParted segítségével hoztam létre. Az SSD mindkét házban megfelelően működik, leszámítva a TRIM hiányát, ami alapból nem támogatott USB-n.

    ● JMicron JMS567

    [~ $ uname -a
    Linux ku-lenovo 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

    ~ $ dmesg
    [ 126.467656] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 126.485333] usb 2-1: New USB device found, idVendor=357d, idProduct=7788
    [ 126.485344] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 126.485349] usb 2-1: Product: USB to ATA/ATAPI Bridge
    [ 126.485354] usb 2-1: Manufacturer: JMicron
    [ 126.485358] usb 2-1: SerialNumber: ************************
    [ 126.489673] scsi host6: uas
    [ 126.490356] scsi 6:0:0:0: Direct-Access KINGSTON SHFS37A120G 0114 PQ: 0 ANSI: 6
    [ 126.491817] sd 6:0:0:0: Attached scsi generic sg3 type 0
    [ 126.492009] sd 6:0:0:0: [sdc] Spinning up disk...
    [ 127.496572] ..ready
    [ 128.501988] sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 128.501997] sd 6:0:0:0: [sdc] 4096-byte physical blocks
    [ 128.502595] sd 6:0:0:0: [sdc] Write Protect is off
    [ 128.502603] sd 6:0:0:0: [sdc] Mode Sense: 53 00 10 08
    [ 128.502927] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
    [ 128.508732] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
    [ 128.511344] sd 6:0:0:0: [sdc] Attached SCSI disk
    [ 128.735508] EXT4-fs (sdc2): recovery complete
    [ 128.735627] EXT4-fs (sdc3): recovery complete
    [ 128.736111] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 128.743135] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
    [ 129.029723] EXT4-fs (sdc1): 20 orphan inodes deleted
    [ 129.029727] EXT4-fs (sdc1): recovery complete
    [ 129.031773] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

    ● ASMedia ASM1153

    [~ $ uname -a
    Linux ku-lenovo 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

    ~ $ dmesg
    [ 1340.183811] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
    [ 1340.201122] usb 2-1: New USB device found, idVendor=174c, idProduct=1153
    [ 1340.201132] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 1340.201137] usb 2-1: Product: AS2115
    [ 1340.201141] usb 2-1: Manufacturer: ASMedia
    [ 1340.201145] usb 2-1: SerialNumber: 00000000000000000000
    [ 1340.202284] usb-storage 2-1:1.0: USB Mass Storage device detected
    [ 1340.203180] scsi host7: usb-storage 2-1:1.0
    [ 1341.201470] scsi 7:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
    [ 1341.202244] sd 7:0:0:0: Attached scsi generic sg3 type 0
    [ 1341.211524] sd 7:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1341.213087] sd 7:0:0:0: [sdc] Write Protect is off
    [ 1341.213097] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 1341.213361] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1341.214812] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
    [ 1341.216224] sd 7:0:0:0: [sdc] Attached SCSI disk
    [ 1341.402010] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1341.415710] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1341.449077] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)

    [ Szerkesztve ]

Új hozzászólás Aktív témák