Keresés

Hirdetés

Új hozzászólás Aktív témák

  • ozz

    tag

    Sziasztok!

    Banális kérdés lesz nektek, én viszont nem tudom 1043nd routernél beállítani hogy usb-n keresztül winchestert használhassak.
    Van valahol erről leírás ehez a típushoz?

    Probálgattam már a router beallitásainál látszik a winchester de mégsem tudom gépről elérni.

    Ha tudnátok segítni azt előre is köszönöm!
    :)

    [ Szerkesztve ]

  • ozz

    tag

    Sziasztok!

    Kezdő, sőt inkább amatőr vagyok, feldobtam egy vargalex 1.02.1 firmware-t.
    Net és wifi müködik.

    Szeretnék usb-n használni egy winchestert.

    1.Megformáztam itt http://192.168.1.1:8081/ erre: 2. Creating 3 partitions (extroot - pivot root version) ext4.

    2. Majd openwrt alatt SYSTEM - MOUNT POINTS mit kell pontosan beállítani?
    3. SERVICES - NETWORK SHARE-nél szintén ?

    Köszönöm a segítségeteket előre is!

    Alex-et már kérdeztem pár dologban amikben sokat segített, de gondolom most elfoglalt ilyesmire, ha ki tudnátok segíteni azt nagyon megköszönöm!

    Üdv
    :)

  • ozz

    tag

    válasz vargalex #25843 üzenetére

    Alex köszönöm szépen, meg lett a hiba... az exploreres formázás! Furcsa is volt milyen gyorsan készlett, hát azért mert nem csinálta meg.

    Halozati meghajtokent hasznalom, tökéletesen.
    WIFI-n a gyari fw-nel 600-700KB/s -el masolt gép es usb hdd között most 3600KB/s. :)

    :R

    A torrentezéshez is tudnál adni némi segitséget hogy ott mit kell bűvészkedni? :R
    Az eddigieket már megtanultam köszönet érte :)

    [ Szerkesztve ]

  • ozz

    tag

    válasz ozz #25849 üzenetére

    inSSIDer 2-el megnéztem a környékbeli hálózatokat a sajátomra MAX Rate 130-at ír.

    Nem tudom hogy ennek következménye e de most csak 2600KB/s-t tudok kicsikarni.

    Nem állítottam semmit! Vélemény? :D

  • ozz

    tag

    Vargalex 1.02.1 frimware van most a routeren szeretném frissíteni, de melyiket ajánlanátok a kettő közül?

    1. v1.02.1-ReBuilded verzió - 2.6.39.4-es kernel
    2. v1.1 verzió - 3.2.9-es kernel

    Valamint ebben az esetben a SYSUPGRADE FIRMWARE változatot kell felrakni! Ugye?

  • ozz

    tag

    válasz Marcelldzso #26650 üzenetére

    Ilyen probléma nálam is van annyi különbséggel hogy a notiban 150Mbps-es háló kártya van és a win7 a sebességre csak 65Mbps-t ír.

    Viszont másolni 2.6 - 4MB/s is tudtam, átlag viszont a 2-3MB/s.

    Én csak azt nem értem hogy a win7 miért ír csak 65Mbps-et?!

  • ozz

    tag

    Sziasztok!

    Adott a router, vargalex firmware már több féle felkerült rá, viszont most elkövettem egy hibát vissza szerettem volna tenni rá a gyárit és nagy valószínűséggel megpusztult :((

    Jelenleg a power led világít folyamatosan, a sys led meg fel fel villan azon kivül még villog a LAN1 ahova az utp kábel van kötve a notival.
    (Pont igy viselkedett akkor is mikor elkezdte a firmwaret frissiteni és alatta is ez volt, ekkor a notin explorer alatt ki volt irva hogy ne kapcsoljam ki az eszközet meg ha nem valaszol frissitsek ra, az utlsó sor meg hogy a Router "valami" waiting... )

    Most már ha megpróbalom elérni akkor Explorer alatt meg 1 mp-re felvillan a Luci..... feliratos fekete képernyő utánna incorrect password ablakra vált.

    Véleményetek mehet a kukába???
    Vargalex igy távgyógyításban mi a véleményed a történtekről és hogy lehet valamit tenni?

    köszi mindenkinek :R

    [ Szerkesztve ]

  • ozz

    tag

    válasz Intruder2k5 #27081 üzenetére

    Microsoft-nak van a Security Essentials (vagy hogy hívják) virus ellenőrzője semmi utolagos nincs.

    Igen próbáltam 5 mp-nél tovább resetelni, de semmi.

  • ozz

    tag

    válasz Intruder2k5 #27084 üzenetére

    Ezeket holnap melo után mind megnézem, sajna hajnalban kelés :((

    Addig is minden ötletet nagyon köszönök Neked és mindenki másnak is.

    Bármit amit írtok az holnap végigzongorázom és megírom mi a helyzet. :R

  • ozz

    tag

    válasz Intruder2k5 #27084 üzenetére

    Hi,

    Megnéztem másik böngészővel azzal is ez jelenik meg

    192.168.1.1 Ping-re reagál 4 küldött, 4 fogadott csomag.

    Van ötleted hogy menthető e???

    PWR led - folyamatosan világít
    SYS - villog

  • ozz

    tag

    válasz Intruder2k5 #27108 üzenetére

    Igazad volt, müködik!

    Ott hibáztam el hogy exploreren kivül, megnéztem google chrome-al is, de mindkettőt használtam már a luci-s felületen!
    Letöltöttem egy firefoxot és azzal már be tudtam lépni, most gyari fw van rajta.

    Most tudom tesztelni az új wifi kártyát (gyári cuccokkal), aztán majd megy vissza rá az vargalex.

    Köszönöm a segítséged :R

    [ Szerkesztve ]

  • ozz

    tag

    válasz ozz #27109 üzenetére

    Viszont amit észrevettem

    Vargalex 1.02.1 inSSIDer 130Mbps látta a routert (minden a max 300ra volt állítva) a notebook wifivel 65Mbps-el tudott kapcsolódni.

    Most felrakott gyári fw inSSIDer 300Mbps látja a routert (itt is max 300ra van állítva) és a notebbok wifivel 150Mbpsel tud kapcsolódni.

    Ez hogy lehet? :)

  • ozz

    tag

    válasz vargalex #27113 üzenetére

    Maga a routernel nincs sok beállítási lehetőség az arra volt állítva! Az hogy a notebook hogy kapcsolódik az más kérdés de nálam az inSSIDer csak 130nak latta, azt hittem a routerrel van baj de a gyári fw-el 300nak látja.

    Na még kisérletezek aztán ha visszakerül a te fw-d akkor még jelentkezem ezügyben :)

  • ozz

    tag

    válasz Intruder2k5 #27120 üzenetére

    az szép :) , most szereztem egy 300as wifi kartyat a notebookhoz, de még egyenlőre nem megy csak 150el, sajna szivas mert régi kártya és még nem találtam igazán hozzávaló win7 64bites driver.

  • ozz

    tag

    Sziasztok!

    Tudom 100x volt már kérdés de igazából a megoldás részemről még mindig nincs meg, a problémám hogy vargalex 1.02.1 Rebuild Wifi-je 130Mbps-el sugároz.

    InSSIder-ben ez van (130Mbps)

    A firmware-ben ezek vannak beállítva

  • ozz

    tag

    válasz ozz #27479 üzenetére

    még egy kép

    Wifin a net is használhatatlan lassú. Kábelen gyors.

    Hol lehet a hiba???

  • ozz

    tag

    válasz vargalex #27481 üzenetére

    Hello Alex!

    Nincs a közelemben senki olyan csatornán amit én használok, a gyári firmware-el vitte a 300Mbps-est ugyanezen a csatornán.

    De már probálkoztam más csatornákon is sikertelenül.

  • ozz

    tag

    válasz vargalex #27481 üzenetére

    A noscan sort mivel tudom betenni, laikus felhasználó vagyok.

    Van egy putty letöltve a gépre, azzal SSH-n menni fog? vagy teljesen hülyeséget írtam?

    Nagyon hálás lennek egy kifejtős segítségnek...

  • ozz

    tag

    Még egy olyan kérdésem lenne a másik mellé, hogy lehet szabályosan leválasztani a HDD-t a routerről? és majd vissza is rakni?

  • ozz

    tag

    válasz vargalex #27486 üzenetére

    Hi,

    Igen igazad van a 7est itt más is használta éppen, de kisérleteztem már sokkal.
    Amúgy amit linkeltél képet az szerint ha az 1es csatornát használom akkor az lefedi a egészen a 5ös csatornáig? Akkor it elég sok az átfedés.
    Ezt nem tudtam érdekes újdonság számomra.

    Köszönöm a parancsot holnap kiprobálom és megírom mi a helyzet! :R

    az usb-n lévő hdd leválasztás hogy kell szakszerűen kivitelezni erre még tudnál adni tanácsot?

  • ozz

    tag

    válasz vargalex #27486 üzenetére

    Hello Alex!

    köszönöm a parancsot működik a wifi max-on.

    Csak érdekesség kedvéért samban másolás wifi-n keresztül ugyanazok a fájlok minden esetben:

    gyári fw
    kliensről a router hdd-re ~2.8Mb/s
    router hdd-ről a kliens gépre ~ 3.5Mb/s

    vargalex 1.02.1 Rebuild
    kliensről a router hdd-re ~3.5Mb/s
    router hdd-ről a kliens gépre ~ 5.3Mb/s

    A kliens notebook amiben egy 150/300Mbps wifi kártya van.

  • ozz

    tag

    Sziasztok!

    Már párszor segítettetek amit ezúton köszönök ismét, ezen felbuzdulva lenne egy kérdésem.
    olvasgattam Alex logout oldalát

    "A QSS gomb-hoz tartozó script futása le van tiltva. Az engedélyezéséhez a /etc/hotplug.d/button/10-qssbutton script-ben az ENABLED változó értékét kell átírni hozzá 1-re (egyébként módosítás nélküli megnyomás esetén erre figyelmeztet a log-ban). Aktiválás esetén, ha leállította a szolgáltatásokat, illetve umount-olta a drive-okat, akkor kikapcsolja az USB ledet."

    Ezzel a QSS gomb megnyomása esetén leválasztódik a winyo az usb-ről?

    Szájbarágosan ezt hogy tudom kivitelezni?
    Puttyal ssh-n keresztül be tudok lépni, de utánna mit kell bepötyögni?

    Amatőr kérdésekért sorry :DD

  • ozz

    tag

    válasz vargalex #27544 üzenetére

    hi Alex,

    Ezzel tudtál igazán segíteni, hogy megírod a parancsot és csak futtatnom kell.

    köszönöm a fáradozásod :R

  • ozz

    tag

    válasz vargalex #27544 üzenetére

    Kiprobáltam működik. Viszont mikor visszadugom az usb-re a winyot akkor "hivatalosan" mit kéne csinálni hogy lássa megint a router?

    Nem tudom jól tettem-e de nyomtam egy újrainditást a routeren és jó lett.

    Annyit még észrevettem hogy mikor megnyomtam a QSS gombot akkor a led csak akkor kapcsolódott ki amikor lehuztam az usb-ről a winyot.

    [ Szerkesztve ]

  • ozz

    tag

    Sziasztok!

    vargalex 1.02.1 Rebuldet használok kábelnettel, teljesen meg vagyok elégve vele torrent letöltés mellett (igaz egyszerre csak egyet töltök) is lehet még filmet nézni a routerre kötött hhd-ről, böngészni is gyorsan tudok a winyom.

    Viszont amit észrevettem néha letöltés mellett eldobja a wifi a netet! Wifi kapcsolat van de net nincs.
    Ha nem megy a letöltés akkor nincs ilyen probléma.

    Találkozott már valaki ilyennel?

    sima 1.02.1-nél nem tapasztaltam ilyet.

    a sima 1.02.1 firmware-ből le lehetne valahonnan tölteni sysupgrade változatot?

    [ Szerkesztve ]

  • ozz

    tag

    válasz vargalex #28111 üzenetére

    ellenőrző checksum-ot is be tudnál írni? hogy letöltés után lehessen ellenőrizni :R

  • ozz

    tag

    Alex

    Azt hogy eldobálja a router vagy a kliens a wifi-t, lehet rá valamilyen megoldás?

    Írtad itt, hogy valószínű a kliensnél lesz a hiba de lehet ezzel kezdeni valamit?

  • ozz

    tag

    Mivel nem nagyon szokott lenni hsz a wifi eldobásra tapasztalatom alapján, nem a kliensnél lesz a hiba mert mikor eldobja a wifit akkor a környéken lévő összes hálózatot látom a notival.
    Vagy ez nem jelent semmit?!

  • ozz

    tag

    válasz kovacszk #28232 üzenetére

    Ha én is eljutnék idáig az nagyon jó lenne. Viszont nálam gyári fw nem csinálta.

  • ozz

    tag

    válasz kovacszk #28232 üzenetére

    Ha én is eljutnék idáig az nagyon jó lenne. Viszont nálam gyári fw nem csinálta.

  • ozz

    tag

    válasz Intruder2k5 #28239 üzenetére

    köszönöm megnézem.
    Ez az egy kis "bosszantó" hiba van amúgy a vargalex 1.02.1 simával nekem atom stabil, igaz csak net, torrent, meg a router hdd-ről filmet nézek na meg másolgatok le-fel.

  • ozz

    tag

    válasz ozz #28241 üzenetére

    Megnéztem másik géppel és telefonokkal is és ugyanez a helyzet, csak a routernél lesz a gond. Mi van ha noscan1 dolog zavar be?

    [ Szerkesztve ]

  • ozz

    tag

    válasz suste #28268 üzenetére

    Ebben teljesen igazad van, de számomra pont ez a bosszantó hogy a legalapabb dologgal van baj és nálam ez a min. elvárt része a routernek hogy jól müködjön.

    Van hogy csak a netet dobja le és wifi van , van hogy mindent.

  • ozz

    tag

    válasz suste #28269 üzenetére

    váltogattam csatornákat de nem segített, igazából random a ledobálás van hogy órákig semmi van hogy 20perc alatt 2x is.

    Régebben olvastam hogy valaki country code HU-ról valaki a US-t használja most én is átáltam, elkezdek kisérletezni aztán ki tudja.

    Jelenleg az 1+5 csatronát használom ez az egy páros ami szabad teljesen.

    A Transmit power: 20dBm (100mW) most jelenleg magától, ez jó így?
    Amúgy 3m-re vagyok a routertől ugyanabban a helységbe.

  • ozz

    tag

    válasz suste #28287 üzenetére

    Az US dolog nem jött be , masik csatorna se. :(

    N-es wifivel használom. Teljesen alapról kezdtem talán ha jól emlékszem akkor nem volt vele gond vagy nem tűnt fel ennyire mikor nem volt a router usb-n hdd. Viszont amint rákerült de torrent még nem ment már dobálta.

    Mi a negatív hatása ha a transmit powert lefele veszem?

  • ozz

    tag

    válasz suste #28292 üzenetére

    Azert van N-en hogy max sebességgel tudjak másolni a router es a gép között , meg a filmek se akadjanak ha routerről nézem gépen.

    A szomszédságban nagyon sok hálózat van sajna.

    Logban van bejegyzes a szakadásről, látom ugy hogy wifi van de kis sarga háromszöggel tehat net nincs. És olyan is hogy a wifi jel eltünik teljesen és mig a szomszéd halozatokat latom ha rakeresek addig a sajatomat nem csak par perc mulva.

    [ Szerkesztve ]

  • ozz

    tag

    válasz suste #28295 üzenetére

    gyari fw-vel nálam nem fagyott bár nem sokat használtam és talán hdd-vel nem is.

    Az a baj hogy szeretném maxon használni a wifit ha már tudja minden akkor legyen gyors.
    Ralink wifi kártyám van.

    Lehet lemondok a torrentről és megy vissza a gyári fw azon kivül tud mindent amit én jelenleg használnék.

    Most vettem 2-3 hónapja nem szívesen vennék másikat, meg el is kéne ezt adni... macerás.

    köszi a segítséget!

  • ozz

    tag

    válasz vargalex #28297 üzenetére

    Igazából ha hardveres a hiba akkor se lesz nekem jó, nem szeretnék/fogok lecserélni 2 gépet meg 2 telót ezért.

    De kiváncsiságból körbenézek ismerős körökbe kinek mi van, és megnézem.

  • ozz

    tag

    válasz vargalex #28299 üzenetére

    90%ban mióta uj fw van a routeren 1 eszköz használja.
    Nem lehet hogy valami beállítási hiba van? annyira hihetetlen számomra hogy ez szivat :)

    [ Szerkesztve ]

  • ozz

    tag

    válasz ozz #28300 üzenetére

    Kernel log-ban meg ez

    gine when we start RX up
    [34851.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34851.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34851.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34851.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34852.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34855.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.840000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.080000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34856.090000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.330000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.340000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.580000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.590000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.840000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.080000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.090000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.330000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.340000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.580000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.590000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.830000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34864.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34866.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34866.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34866.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34866.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34868.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34870.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34870.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34870.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34870.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34871.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34872.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34873.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34873.150000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [35569.910000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915627153:1915627303 (repaired)
    [35643.070000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915827406:1915828850 (repaired)
    [35683.670000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35684.550000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35686.310000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35689.840000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)

  • ozz

    tag

    System log

    System log-ban ez van

    Jun 29 09:41:50 OpenWrt kern.err kernel: [34862.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34863.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34863.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34864.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34864.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34865.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34865.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34866.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34866.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34867.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34867.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34868.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34868.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34869.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34869.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34870.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34870.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34871.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34871.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34872.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34872.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34873.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34873.150000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** IEEE 802.11: authenticated
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** WPA: pairwise key handshake completed (RSN)
    Jun 29 09:42:07 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPDISCOVER(br-lan) 30:17:**:**:**:**
    Jun 29 09:42:07 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPOFFER(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** IEEE 802.11: authenticated
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** IEEE 802.11: associated (aid 2)
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: pairwise key handshake completed (RSN)
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPREQUEST(br-lan) 192.168.1.248 1c:4b:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPACK(br-lan) 192.168.1.248 1c:4b:**:**:**:** Zoli-PC
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPREQUEST(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPACK(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:51:33 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:01:33 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:11:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:21:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:31:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:41:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:51:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:01:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:11:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:18:53 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:53 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:01 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:01 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:06 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:06 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:11 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:11 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:21 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:21 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:21:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:31:35 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)

  • ozz

    tag

    válasz vargalex #28306 üzenetére

    Alex megpróbálom , de tudod ennyire nem vágom a témát... esetleg tudnál erre adni egy parancsot amit a lucin elküldök???
    :R

  • ozz

    tag

    válasz vargalex #28313 üzenetére

    Köszönöm elmentem magamnak a parancsot, viszont kipróbálni már csak hétfőn tudom , de mindenképpen megírom a tapasztalatokat.

    Köszönöm a segítséget neked is.

    Jó hétvégét mindenkinek :)

Új hozzászólás Aktív témák