- Alapértelmezett konfiguráción sok Core CPU-nak lehet stabilitási gondja
- NVIDIA GeForce RTX 3080 / 3090 / Ti (GA102)
- Modern monitorokra köthető 3dfx Voodoo kártya a fészerből
- Intel Core i5 / i7 / i9 "Alder Lake-Raptor Lake/Refresh" (LGA1700)
- Furcsa EPYC CPU-kkal készül az AMD
- Milyen processzort vegyek?
- Házimozi haladó szinten
- Androidos tablet topic
- Hobby elektronika
- TCL LCD és LED TV-k
Hirdetés
-
A franciáknak elege van abból, hogy minden gyerek mobilozik
it Vissza akarják szorítani a gyerekek és tinédzserek közösségi média- és okostelefon-használatát.
-
A Plus modell gyengébb lett
ma Újabb tabletet ad ki a HTC Oroszországban, az A101 Plus Edition viszont gyengébb hardvert kapott, mint 2022-es elődje. Hol van a plusz?
-
Toyota Corolla Touring Sport 2.0 teszt és az autóipar
lo Némi autóipari kitekintés után egy középkategóriás autót mutatok be, ami az észszerűség műhelyében készül.
Új hozzászólás Aktív témák
-
holloo
csendes tag
Nekem ez működött Canon MP140-nél:
http://resetprinters.com/how-to-reset-canon-mp-series-printers-and-fix-common-errors/
How to Reset Canon MP Series Printers and Fix Common Errors
List of Canon Mp Series Printers:
canon mp830
canon mp780
canon mp640
canon mp620
canon mp610
canon mp600
canon mp560
canon mp530
canon mp520
canon mp510
canon mp500
canon mp490
canon mp470
canon mp460
canon mp280
canon mp270
canon mp258
canon mp250
canon mp240
canon mp210
canon mp198
canon mp190
canon mp160
canon mp150
canon mp145
canon mp140
Common Canon MP Error Messages:
P02 (Carriage error)
P03 (Line feed error)
P05 (ASF sensor error)
P06 (Internal temperature error)
P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full.
P08 (Print head temperature rise error)
P09 (EEPROM error): – The logic board need to be replaced for this one.
P15 (USB VBUS over current)
P20 (Other hardware error
P22 (Scanner error)
E13 or E16: Ink has run out. Press the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.
E04, E05, E14 or E15: Cartridge may not be installed properly. Reinstall the ink cartridge.
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16-E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error –
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
Reset Procedure:
Turn ON the printer.
Press and Hold the “Reset button” on the printer.
While pressing the “Reset button“, press and hold the “Color Start” button.
Wait for 5 seconds.
Release the “Color Start” button, and then release the “Reset Button“.
Wait until the printer starts to configure itself. This should take approximately around 20 seconds.
The no. “1” should be on the display, press and hold the “Tool” button and the letter “A” should now be on the display.
While pressing on the “Tool” button, press and hold the “Reset button“.
Wait util there are no more blinking lights on the printer.
Release the “Tool” button, and then release the “Reset Button“.
Új hozzászólás Aktív témák
- gban: Ingyen kellene, de tegnapra
- Alapértelmezett konfiguráción sok Core CPU-nak lehet stabilitási gondja
- Yettel topik
- Ubiquiti hálózati eszközök
- bambano: Bambanő háza tája
- Vodafone mobilszolgáltatások
- Android szakmai topik
- Aliexpress tapasztalatok
- Külpolitika
- Android alkalmazások - szoftver kibeszélő topik
- További aktív témák...