Keresés

Hirdetés

Új hozzászólás Aktív témák

  • Kékes525

    félisten

    válasz DJ. Ru$y #87532 üzenetére

    Az itt található használati útmutató: TL-WR940N V4 ezt írja.

    "4. 3. 3. LAN
    1. Visit http://tplinkwifi.net, and log in with the username and password you set for
    the router.
    2. Go to Network > LAN.
    3. Configure the IP parameters of the LAN and click Save.
    • MAC Address - The physical address of the LAN ports. The value can not be changed.
    • IP Address - Enter the IP address in dotted-decimal notation of your router (factory
    default - 192.168.0.254).
    • Subnet Mask - An address code that determines the size of the network. Normally
    255.255.255.0 is used as the subnet mask.
    IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allow you to watch TV on IPTV-supported devices in the LAN .
    Note:
    • If you have changed the IP address, you must use the new IP address to login.
    • If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP Server will
    be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured."

    [ Szerkesztve ]

    Minden számítógép füsttel működik, ha kimegy belőle, akkor nem működik.

Új hozzászólás Aktív témák