Új hozzászólás Aktív témák

  • Jorus

    nagyúr

    válasz kecz #9194 üzenetére

    Vmi iesmit próbálj meg: CTRL+F1 asszem a M.I.T. menü a te lapodnál is.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: x10
    CPU Frequency ...........................: 3.000MHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 300Mhz
    PCI Express Frequency (Mhz) .........:100MHz
    C.I.A.2 .................................:[Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400MHz
    System Memory Multiplier ..............: 2.66c
    Memory Frequency (Mhz) ..............: 800MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15

    Advanced Timing Control
    tRRD........................................... Auto
    tWTR.......................................... Auto
    tWR............................................ Auto
    tRFC........................................... Auto
    tRTP........................................... Auto
    Command Rate (CMD) ................. Auto

    Channel A
    Static tRead Value.........................: 7-10
    tRD Phase0 Adjustment.................. Auto
    tRD Phase1 Adjustment...................Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank).................. Auto
    Dimm1 Clock Skew Control............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank).................. Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    CPU
    CPU Vcore….……….........................: 1.3V
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.760V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.760V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 1.8V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]

    Teszt. Ha megy a 3GHz 1.3V-vel, akkor vissza veheted kicsit, ha nem, akkor alacsonyabb FSB-n próbálkozz, és a tesztek alatt figyelj a CPU hőmérsékletre a gyári hűtő miatt! Ha instabil, kipróbálhatod C1E és EIST nélkül, néha bejön.

Új hozzászólás Aktív témák